Windows 10 iot iso installation
- #WINDOWS 10 IOT ISO INSTALLATION HOW TO#
- #WINDOWS 10 IOT ISO INSTALLATION INSTALL#
- #WINDOWS 10 IOT ISO INSTALLATION ZIP FILE#
#WINDOWS 10 IOT ISO INSTALLATION HOW TO#
In this section, we will show you how to flash the Windows 10 IoT Core image into RSB-4411 QuadCore. After a few seconds you should see the Win10 IoT boot-logo and shortly after you should see the Win10 IoT Core default application: NOTE: Make sure that the microUSB cable is not plugged-in, otherwise the USB devices will not be detected. Or, USB keyboard & mouse will be invalid. So, we have to cheat the device that USB host is ready by inserting a sdcard. Because the definition of USB id pin are different to RSB-4760 and DragonBoard, the USB id is defined to sdcard detection GPIO on RSB-4760.
The RSB-4760 is now ready to boot into Windows 10 IoT Core OS.Ĭonnect Mouse, Keyboard and Display to the RSB-4760 and also insert a sdcard. Once the download is complete, disconnect the power supply and microUSB cable from the board and change both the SW1 switch pins back to the OFF position. NOTE: The download will overwrite any previous content of the eMMC memory. Click the " Program" Button and wait for the image to be downloaded to the board. In the DragonBoard Update Tool click the " Browse" button and locate the Win10 IoT Core Image file you downloaded during Step 1. The Update Tool should detect the board and the Connection Status should show: " Connected". Start the DragonBoard Update Tool you installed during the Step 1. Then, connect a USB cable to the micro USB port and connect the other end to an empty USB port on your Host PC. Both switch pins are set to ON, and power on the RSB-4760 device. In Windows 7, this new directory is under C:\Program Files\Microsoft IoT\FFU\ Step 2 : Set up your deviceįirst, you have to set the SW1 boot switch to enable download mode. The installer creates a new directory: C:\Program Files (x86)\Microsoft IoT\FFU\QCDB410C\ which contains the DragonBoard410c image file " flash.ffu". Double click the file to start the installation. (Look for a new CD-ROM drive) The mounted virtual drive contains an installer file " Windows_10_IoT_Core_for_QCDB410C.msi". This will automatically mount the ISO as a new virtual CD-drive. Download the DragonBoard Windows 10 IoT Core Imageĭownload Windows 10 IoT Core image from here.The installer will create a shortcut to the DragonBoard Update Tool on your desktop and in your start menu, under Qualcomm ->DragonBoardUpdate Tool.
#WINDOWS 10 IOT ISO INSTALLATION ZIP FILE#
Extract the zip file and install on your desktop. Download and install the DragonBoard Update Toolĭownload the DragonBoard Update Tool by selecting the download link appropriate for your PC: x86 or 圆4.Microsoft recommends to run Windows 10, but the following steps actually can work on Windows 7. You can also refer to it for more details. Most of the steps below are based on "Get Started" page from Microsoft. Here, we will show you how to flash the Windows 10 IoT Core image into RSB-4760. Fortunately, the image for Dragonboard 410c is also available on our devices, such as RSB-4760. Currently we do not have a customized Windows 10 IoT Core image for Advantech APQ8016 projects.